A distributor buys your boxed products for resale. A fulfilment warehouse stores another batch and dispatches orders from your own website. The retail packaging may be identical, but the two arrangements can produce different packaging EPR responsibilities. The warehouse may also remove incoming cartons and add mailing boxes, creating packaging flows with their own attribution and reporting questions.
The useful starting point is to assign responsibility by legal entity, country and packaging flow. Then name the party supplying the data and the party making the declaration. A partner’s promise to “handle EPR” becomes useful when those details are clear.
Timing in November 2026: the Packaging and Packaging Waste Regulation (PPWR) generally applies from 12 August 2026. National registration, scheme and reporting arrangements still matter. Article 44 gives Member States a separate timetable for establishing its national registers: 18 months after the first relevant implementing act enters into force. That timetable should not be treated as permission to pause existing national obligations.
Start with the sale, then identify the packaging
Extended producer responsibility, or EPR, places waste-management responsibilities on a legally defined producer, including financing obligations and associated registration and reporting. Under Article 3(1)(15) of the PPWR, the test depends on the packaging category, where the business is established, where the packaging is first made available and whether supply is directly to an end user.
For sales and grouped packaging, the domestic test follows the first supply of the packaged product. For transport, service and primary production packaging, it follows the first supply of the packaging. E-commerce packaging is classed as transport packaging. Consequently, the producer responsible for a branded jewellery box and the producer responsible for its mailing package need not be the same business.
| Arrangement | Result for the original sales packaging, on these facts | Useful evidence |
|---|---|---|
| A brand established outside Germany sells packed goods to an independent German distributor. The distributor buys for resale and first makes those goods available from within Germany on the German market. | The German distributor is the producer for that sales packaging under the domestic first-supply test. | The purchasing and resale entities, supply documents, German registration and confirmation of the packaging quantities covered. |
| The same foreign brand sells directly to German end users through its own store. An independent German warehouse stores and dispatches the orders. | The brand falls within the cross-border direct-supply producer test for the sales packaging. Dispatch by the warehouse does not by itself transfer that role. | The seller’s identity, customer destinations, relevant registration and representation arrangements, and warehouse dispatch records. |
| A German-established brand first supplies its own packaged products in Germany to a distributor, which resells them unchanged. | The brand is the producer for that first domestic supply. The distributor’s subsequent resale does not create another first supply of the same packaging in Germany. | The original producer’s registration and records linking the packaging to the relevant supply. |
“Outside Germany” can mean another EU Member State or a country outside the EU. Record the brand’s actual establishment separately from the packaging’s manufacturing origin and the warehouse location. Also establish whether a partner really buys for resale: a sales agent that forwards orders presents a different arrangement. If a distributor later supplies another country, repeat the analysis for that destination and distinguish resale to another distributor from direct supply to end users.
The PPWR’s end-user definition includes professional end users. An office buying desk accessories for its own use can be an end user; a retailer buying the same accessories for resale is further supplying them in the form received. A “B2B” label on an order therefore does not settle the EPR route.
Keep this producer allocation separate from responsibility for packaging conformity, technical documentation and the EU declaration of conformity. Those roles can overlap, but an EPR registration does not establish packaging conformity. Our plain-English guide to PPWR labels, technical documentation and EPR explains how these obligations fit together.
Follow three packaging flows through the warehouse
1. Packaging that stays with the product
The retail box, its insert and other packaging travelling with the product need to follow the sales route. For a brand using both channels, the same packaging specification may feed a distributor’s declaration for one batch and the brand’s declaration for another. The handoff therefore needs both the packaging version and the quantities belonging to each route.
A distributor’s confirmation should identify the relevant legal entity, country, packaging scope and period. Ask how its records distinguish local supplies, onward cross-border supplies, returns and remaining stock. A registration number establishes an identity in a register; the supporting records establish which movements and packaging quantities the arrangement covers.
2. Transport packaging removed at the warehouse
Incoming master cartons, protective film and other transport packaging can become waste at the warehouse while the retail packs continue to customers. Article 3(1)(15)(e) provides a route to producer status through unpacking without being an end user, unless another person qualifies under the preceding producer tests. The regulation’s explanation specifically addresses logistics companies handling imported goods even where they do not own those goods.
A German warehouse unpacking master cartons arriving from China can therefore be the producer for packaging that remains there as waste. First establish whether another actor is already the producer for that packaging in Germany under the supply rules. This exception matters: removal should not result in a second allocation of the same obligation.
Ask the warehouse to record what it removes, the material, quantity or weight, date and inbound shipment reference. A waste contractor’s invoice may combine several customers’ packaging and several collection periods. It can support the record, but the warehouse still needs a defensible way to connect the relevant quantities to your incoming goods.
3. Packaging added for dispatch
Mailers, shipping cartons, filler, tape and shipping labels form another flow. Establish who commissioned the packaging, whether it was supplied complete or assembled from components, and where it is supplied to end users. The answer can change when a warehouse replaces a ready-to-use mailer with a carton, tape and loose filler.
- Packaging commissioned under the brand’s name: Germany’s ZSVR guidance identifies the ordering party as the producer of branded shipment packaging, subject to a narrow exception for qualifying micro-enterprises using a supplier of complete packaging in the same Member State.
- Complete, unbranded packaging supplied domestically: the first domestic supplier can be the producer. An unaltered self-sealing mailer is a useful example to distinguish from separately purchased components.
- An unbranded pack assembled from separate materials: ZSVR identifies the party completing the packaging as its producer. Adding components to previously complete packaging can also change the analysis where the modification could affect conformity.
These distinctions come from ZSVR’s guidance for mail-order companies and online retailers. Apply them to the actual arrangement, including any outsourced assembly, and check the destination rules for cross-border dispatch. Coverage in the warehouse country does not establish coverage in every customer country. Your fulfilment agreement should identify the approved packing configurations and require notice of substitutions that affect the allocation or reported quantities.
Separate the legal role from the service being purchased
A contract can allocate work and costs: weighing packaging, maintaining records, preparing permitted filings or paying agreed charges. It cannot simply redefine which company meets the legal producer test. Write down both the producer and any organisation fulfilling obligations on its behalf, together with the scope of that appointment.
A producer responsibility organisation (PRO) can carry out EPR obligations collectively on producers’ behalf under Articles 46 and 47; Member States may make that route mandatory. Obtain evidence identifying the represented producer and the country, packaging categories and period covered. A general membership certificate or a partner’s invoice needs to be read alongside that scope.
An EPR authorised representative is established in the relevant Member State and acts under a written mandate. Article 45(3) provides for appointment by EU-established producers supplying directly into another Member State and allows Member States to require appointment by third-country producers. Germany’s current guidance requires a representative for producers established outside Germany, while keeping LUCID registration itself with the producer. Representation, scheme participation and administrative reporting support are distinct functions, even when one provider offers them together.
Partners also have verification duties. Article 19 requires distributors to verify that the responsible producer is registered. For consumer sales, Article 45(7)–(8) requires producers to provide fulfilment providers with destination-country registration information and an EPR self-certification when the service contract is concluded. The provider must make best efforts to assess that information, request correction of deficiencies and suspend the relevant services if the producer fails to correct them. The producer remains responsible for the information’s accuracy.
Before relying on a partner’s service, agree whose registration will be used, which quantities will be included, who approves the figures and what evidence comes back after filing. This makes the arrangement reviewable before the first reporting deadline—and makes it easier to replace a provider without losing the packaging history.
Build the handoff from specifications and actual movements
At CMIC, we can help prepare material and unit-weight information for the packaging we supply, tied to the approved construction and version. A rigid box’s board, wrap and insert need a clear specification; any ribbon, foam or magnetic components also need to remain visible in the composition record. Your distributor and warehouse contribute the movement information that turns that specification into quantities for a particular route and period.
Annex IX Part B of the PPWR identifies reporting information including producer identification, reporting period, packaging quantities by weight and responsibility arrangements. The following is a practical working handoff that supports those totals. Map it to the current national register and scheme forms, including their packaging classifications and reporting rules.
| Record | Information to exchange | Who normally supplies it |
|---|---|---|
| Responsibility allocation | Producer’s legal name and establishment; relevant country; retail, removed transport or added dispatch packaging; registration; reporting party; applicable period; basis for the allocation. | The brand and partner confirm the arrangement, with the relevant compliance provider where needed. |
| Packaging specification | Packaging identifier and version; related product codes; component description, material composition and unit weights; units per configuration; measurement basis and effective date. | CMIC or the relevant packaging supplier; the warehouse supplies specifications for its additions. |
| Distributor movements | Quantities by packaging version, country and period; receipts and onward supplies; transfers, returns, exports and stock balances; confirmation of the quantities included in its reporting. | The distributor. |
| Warehouse movements | Product units and parcel counts; destination and dispatch date; actual packing configuration; packaging removed on receipt; additions and substitutions; returns and remaining stock. | The fulfilment provider. |
| Declaration record | Final category totals; adjustments and supporting references; submitting entity; submission confirmation; relevant scheme coverage and payment records. | The producer, representative or authorised reporting organisation, according to the arrangement. |
Version dates matter when old and new packaging are used together. A lighter insert introduced halfway through a period should apply to the units packed with that insert. The same applies when a warehouse uses a larger mailer during a promotion. Keeping both configurations identifiable avoids applying today’s weight to every earlier shipment.
A quantity check that reveals common gaps
Consider 1,000 boxed bracelets: 600 go to a distributor and 400 enter the brand’s fulfilment stock. The warehouse dispatches 300 bracelets in 250 parcels, leaving 100 bracelets in stock. If the paper components of each retail pack weigh 80 g, the physical record accounts for 80 kg: 48 kg on the distributor route, 24 kg on the direct-sales route and 8 kg still in stock.
If each of those 250 parcels uses 60 g of paper dispatch packaging, the warehouse adds 15 kg. Using the product count of 300 instead would overstate that flow by 3 kg. Suppose its incoming 400 bracelets arrived in 20 master cartons weighing 400 g each, all removed on receipt: another 8 kg belongs to the removed transport-packaging flow. Other materials need their own entries.
These figures reconcile physical movements. The reporting party then applies the relevant producer allocation and national reporting trigger. In particular, the 8 kg of retail packaging still in stock is an inventory fact; its treatment in the declaration depends on those rules. The reconciliation helps expose missing or duplicated quantities without assuming that every receipt, dispatch or disposal is the reporting event.
- Stock transfers: retain the sending and receiving entities, sites and countries. Distinguish movement between storage locations from a supply to another business, and review cross-border movements separately.
- Returns: link the return to the original shipment and record what happened to its packaging. A sales refund alone does not establish a packaging adjustment; replacement dispatch packaging creates a further quantity to track.
- Exports and onward supplies: keep quantities, dates, destinations and supporting documents. Apply exclusions or corrections only where the relevant national or scheme rules allow them, using the required evidence.
Check what the national arrangement actually covers
Germany: ZSVR distinguishes LUCID registration, system participation to finance recycling, and packaging-volume reporting. For e-commerce shipment packaging, its guidance requires system participation and identifies material, weight and quantity information as necessary inputs. It also explains that shipment packaging delivered to professional end users is included under its overall market assessment. Keep this shipment-packaging scope separate from the analysis of inbound transport cartons removed in distribution.
France: household and professional packaging require separate scope checks. In its announcement of 28 July 2026, the ministry moved the operational start of the professional-packaging EPR scheme to 1 January 2027, from the previously planned 1 July 2026. Its updated professional-packaging guidance confirms that date for the obligations of approved organisations and individual systems.
That announcement concerns professional packaging; household-packaging obligations need their own treatment. For a brand selling through both channels, a household retail pack and a transport carton discarded in professional distribution can belong to different arrangements. Keep their records distinguishable and confirm the scope of each agreement instead of assuming that one French account covers every packaging flow.
Make this handoff part of the packaging brief while the physical pack is still being developed. Share your retail packaging, transport arrangement and warehouse packing method with us through CMIC’s contact page. We can help develop suitable packaging and the accompanying specifications, so your distributor and fulfilment partner can connect their figures to the components and versions actually used.